Canon REALiS X600 - Manual (Page 137)

User Command Specifications ９．Details of command RANGE BLANK
1 RANGE BLANK
RANGE BLANK
RANGE□BLANK
r:BLANK=I, , , …,
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2) The BLANK can be controlled using the BLANK command .
> RANGE BLANK
< r:BLANK=I, ON, OFF
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
－ － － -
SX50 SX6 SX60 X600
This command is used to inquire about the parameter options which enable BLANK to be set.
Setting Control Mode
BLANK setting option request
Reference Commands
Function
Format
Example
Description
Response
０１．００** ０１．０１** ０１．０１** ０１．０１**
× ○ ○ ○
Model Power supply Input Mode
Remote Local Video S-Video D-Video SCART D-RGB A-RGB1 A-RGB2 Comp
SX50 － － － - － － －
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
X600
ＩＤ
Remarks
None
PAGE 129