Canon REALiS X600 - Manual (Page 79)

User Command Specifications 9. Details of command MAIN
1 ＭＡＩＮ
ＭＡＩＮ
MAIN□
Main unit panel emulation button parameters
The key assignments for the front panel buttons are shown below.
*Use the application to adjust the time between pressing of keys.
"i:OK" is returned when the button press request has been acknowledged successfully.
(It does not indicate if the operation for the pressed button was executed properly.)
-1
■ Note 1
■ Note 2
Be absolutely sure to send the '*-REP' parameter, and end the button pressing last of all.
The button pressing is ended in the cases below as well.
<1> When a panel or remote control button has been operated
<2> When an 'RC' or 'MAIN' command has been received
<3> When operation has transferred to the remote mode
Setting
> MAIN FOCUS
< i:OK
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
○ ○ ○
○ ○ ○
* If a command cannot be supported, 'INVALID_MODE' is returned as an error response.
DOWN
ZOOM
OK
LEFT
RIGHT
DOWN+REP
LEFT
LEFT+REP
ZOOM
Example
This emulates the pressing of the front panel buttons for controlling the projector. Description
POWER
It can only be used during Local mode.
MENU
AUTO SET
INPUT
COMPUTER1
COMPUTER2
Commands
Function
Parameter
Front panel operation emulation
ID
VIDEO
AUTOPC
KEYSTONE
UP
Remote control
button
Parameter
POWER
Response
DOWN
KEYSTONE
UP
UP+REP
–
FOCUS
MENU
AUTOSET
INPUT
AUTOPC
COMPUTER1
COMPUTER2
VIDEO
*-REP
SX6 SX60
RIGHT
RIGHT+REP
OK
FOCUS
○ ○ ○
Errors supported by model
SX50
Remarks
X600
○
Ч ○ ○ ○
○ ○
○
Ч
○
Ч
○
○
○
Ч
○
Ч
○
○
○
Ч
○
Ч
○
Ч
○
Ч
○
Ч
Ч
Ч
Ч
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Ч
Ч
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Ч
Ч
Ч
○
○
○
○
○
○
○
○
○
○
○
○
○
○
01.00** 01.01** 01.01** 01.01**
SX50
○ ○
SX6 SX60 X600
Model Power Input Mode
Remote Local
○ ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ × ○
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ × ○
SX60
Format
X600
Mode Control Setting Reference
A parameter with '+REP' signifies "button press start." (This is the same as the status in which
the front panel button is held down.)
Commands
supported
○ POWER_OFF –
With the emulation of the front panel operations, the functions of the buttons corresponding to
the parameters cannot necessarily be executed. Emulation simply consists in emulating the
pressing of the buttons.
POWER button
pressed twice
○ ○ ○
Button press end
Button press start
Button press start
Button press start
Button press start
PAGE 71