Canon HDMI SX800 User Manual
User’s manual, Multimedia projector
Table of Contents
Safety Instructions
Before Use
Projecting an Image
Useful Functions Available During a Presentation
Setting Up Functions from Menus
Projecting an Image from a Digital Camera or an
USB Flash Memory (SX80)
Connecting the Projector to Network (SX80)
Appendix
Index
ENG
MULTIMEDIA PROJECTOR
User’s Manual
This manual is related to the following products:
Table of contents
Document Outline
- To Start Menu
- Features of SX80/SX800 Multimedia Projector
- Quick Reference Guide
- Table of Contents
- Safety Instructions
- Before Use
- Projecting an Image
- Steps for Setting Up the Projector and Projecting an Image
- Setting Up the Projector
- Connecting the Projector
- Starting Projection
- Setting Up the Screen Automatically
- Selecting an Input Signal (INPUT)
- Adjusting Image
- Selecting Screen Aspect and Aspect
- Selecting an Image Mode
- Turning Off the Projector
- Useful Functions Available During a Presentation
- Setting Functions from Menus
- How to Use Menus
- Setting Display Status
- Selecting an Image Projection Mode
- Selecting an Input Signal Type (ANALOG PC)
- Selecting an Input Signal Type (VIDEO/S- VIDEO*)
- Selecting an Input Signal Type (COMPONENT)
- Adjusting Input Signal (ANALOG PC) - Total Dots
- Adjusting Input Signal (ANALOG PC) - Tracking
- Adjust Input Signal (ANALOG PC) - Horizontal position
- Adjust Input Signal (ANALOG PC) - Vertical position
- Adjust Input Signal (ANALOG PC) - Horizontal pixels
- Adjust Input Signal (ANALOG PC) - Vertical pixels
- Selecting HDMI Input Level (SX80)
- Select HDMI Over Scan (SX80)
- Performing Progressive Processing
- Selecting a Menu Position
- Correcting the Screen Color
- Reversing projection
- Capturing a Logo
- Selecting the User Logo Display Position
- No Signal Screen
- Screen When Blank
- Selecting a Logo at Startup
- Selecting Aspect Ratio of Screen
- Setting the Image Quality
- Selecting an Image Quality
- Adjusting the Brightness
- Adjusting the Contrast
- Adjusting the Sharpness
- Making a Gamma Correction
- Making Color Adjustment (HDMI*/Digital PC*/Analog PC/USB*)
- Making Color Adjustment (COMPONENT/ VIDEO/S-VIDEO*)
- Making Advanced Adjustment (Noise reduction)
- Making Advanced Adjustment (Dynamic gamma)
- Making Advanced Adjustment (Mem. color correct) (SX80)
- Making Advanced Adjustment (Auto fleshtone) (SX800)
- Adjusting Fine Color Adjustment (6-axis color adjust) (SX80)
- Reducing the Lamp Brightness
- Resetting the Image Settings
- Setting Various Function
- Setting Auto Setup Function
- Selecting the Power Management Mode
- Skip the POWER Button Operation
- Enabling/Disabling the Beep
- Prohibiting the Projector Operation
- Selecting a Display Language
- Showing/hiding the Guide Screen
- Turning on/off LED Illumination
- Setting for Slideshow (SX80)
- Setting up the Remote Control Channel
- Extending the Menu Display Time
- Setting a Password
- Registering a Password
- Resetting the Lamp Counter
- Initializing network settings (SX80)
- Resetting to the Default Setting
- Checking the Information of the Projector
- Projecting an Image from a Digital Camera or an USB Flash Memory (SX80)
- Connecting the Projector to Network (SX80)
- Appendix
- Troubleshooting
- WARNING Lamp Flash Patterns
- Symptoms and Solutions
- You cannot turn on the projector.
- You cannot project an image from the projector.
- A digital camera or USB flash memory is not recognized. (SX80)
- You cannot hear sound.
- The projected image is blur.
- You cannot project an image appropriately.
- The projector is forced to be turned off.
- You cannot operate the remote control.
- Maintenance
- Relationship between Aspect and Screen Aspect
- Supported Computer Signal Types
- Relationship between Screen Size and Projecting Distance
- Glossary
- Specifications
- Troubleshooting
- Index
- Menu Configuration