Canon REALiS X600 - Manual (Page 167)

User Command Specifications 9．Details of command RANGE BVOL
1 RANGE BVOL
RANGE BVOL
RANGE□BVOL
r:BVOL=I, , , …,
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE BVOL
< r:BVOL=I, 0, 1
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
○
Setting Reference
Commands
supported
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The beep sound can be set using the BVOL command.
○ ○ ○
X600
SX60
× ○ ○ ○ ○ SX6 ○ ○ ○
– ○ ○ × ○ ○ ○ – SX50 ○ ○ ○
S-Video D-Video SCART None
Mode
Remote Local
Remarks
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video
01.00** 01.01** 01.01** 01.01**
○ ○ ○
SX50 SX6 SX60 X600
Format
Example
Description
Response
Beep sound setting option request
This inquires about the parameter options which enable the beep sound to be set.
ID
Mode Control Commands
Function
PAGE 159