Canon REALiS X600 - Manual (Page 18)

User Command Specifications 9. Details of command
1 9. Details of command
9. Details of command
Descriptions of each command are provided starting from the next page.
The command descriptions have the format shown below.
* Alphabetic command name
* This indicates the command format.
* This explains the required parameters for the command.
* This describes the command response.
* This includes the command function, conditions, and notes.
* This provides command usage examples.
*
Supported Command States *
OFF ON PM
Ч ○ Ч
“○” when the power supply state is enabled while power management is in standby. Input signal is required when “×”.
“○” when power supply state is ON.
“○” when power supply state is OFF.
Commands
supported
The command is enabled
in control modes marked
by “○”.
※ Command type
Ч Ч Ч ○ ○ ○
Parameter types
Format
Example
D-Video
Response
Description
A-RGB2 Comp Video S-Video
Model Power
Function * This briefly describes the command function.
Parameter
Mode
01.**** 11.**** 11.**** 11.****
Commands Mode Control Setting Reference
D-RGB A-RGB1
Input
Remarks
SCART Local None Remote
SX50
The command is enabled in states marked by “○”.
○ Ч Ч Ч ○ Ч
SX6 SX60 X600
This defines the environments that support the command (power supply state, input signal
state, control mode).
Indicated here are the commands supported by each model (and user command version). "O": supported; "x":
not supported.
○ ○ ○ ○
PAGE 13