Canon REALiS X600 - Manual (Page 112)

User Command Specifications 9．Details of command GET BVOL
1 GET BVOL
GET BVOL
GET□BVOL
?△BVOL
g:BVOL=ＩＤ>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The beep sound can be set using the BVOL command.
> GET BVOL or ? BVOL
< g:BVOL=ON
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
BEEP sound output
Commands
Function
Format
BEEP sound mute
1
Description
Response
Control Setting
Beep sound value setting inquiry
This inquires about the current beep sound value set.
ID
Setting Meaning
0
Mode
SX50 SX6 SX60 X600
01.00** 01.01** 01.01** 01.01**
○ ○ ○ ○
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video
Mode
Remote Local
Remarks
D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
X600
Reference
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
Example
PAGE 104