Canon REALiS X600 - Manual (Page 127)

User Command Specifications ９．Details of command GET FREEZE
1 GET FREEZE
GET FREEZE
GET□FREEZE
?△FREEZE
g:FREEZE=
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2) Freeze status ON/OFF is controlled using the "RC FREEZE" command in the local mode. (Toggling)
> GET FREEZE or ? FREEZE
< g:FREEZE=ON
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
* If the command cannot be supported, "NOT_POWER_SUPPLIED" is returned as an error response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Description
Response
This inquiry can be made at any time provided that the power-on status is established.
This command is used to inquire about the current NoShow status.
Status Meaning
ＩＤ OFF Image now not frozen
ON Image now frozen
Commands
Function
Format
Freeze status inquiry
Setting Control Mode Reference
SX50 SX6 SX60 X600
０１．００** ０１．０１** ０１．０１** ０１．０１**
× ○ ○ ○
Model Power supply Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 － － － － － － － － － － －
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
X600
Commands
supported
Example
SX60
PAGE 119