Canon REALiS X600 - Manual (Page 104)

User Command Specifications 9．Details of command GET ACADJUST
1 GET ACADJUST
GET ACADJUST
GET□ACADJUST
?△ACADJUST
g:ACADJUST=
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The advanced color adjustment can be set by the ACADJUST command.
> GET ACADJUST or ? ACADJUST
< g:ACADJUST=6AX
* Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
Ч ○ Ч
－ － －
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
×
SX50 SX6
01.00**
○ Ч Ч
01.01** 01.01** 01.01**
－ －
X600
－ －
SX60
－ － － － SX6 － － －
－ ○ ○ ×
SCART None
SX50 Ч Ч Ч ○ ○ ○ －
Mode
Remote Local
Remarks
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video
Commands
Function
Format
Description
Response
MEM_L
MEM_M
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
High memory color adjustment
6-axis adjustment
Advanced color adjustment inquiry
Mode Control Setting Reference
Commands
supported
MEM_H
6AX
Example
This inquires about the details of the current advanced color adjustment.
ID
SX60 X600
Details of adjustment
NOCORRECT Meaning
No adjustment
Low memory color adjustment
Medium memory color adjustment
PAGE 96