beautypg.com

Dpon – Canon REALiS X600 User Manual

Page 71

background image

User Command Specifications

9. Details of command DPON

1

DPON

DPON

DPON=

Direct power-on setting parameters

For details, refer to the

RANGE command

.

For all other responses, refer to

"Error List."

This command is used to set direct power-on function to ON or OFF.

(1)

However, a "busy" response is given while the zoom or focus lens is being driven.

( Refer to the

ZCONTDRV command and FCONTDRV command.

(2)

(3)

("e:1004 POWER_MANAGEMENT_OFF" is returned.)

(5)

For details, refer to the

GET command

.

Setting

> DPON=ON

Direct power-on is set to ON.

< i:OK

Reference

> GET DPON or ?DPON

The current direct power-on setting is obtained.

<

g:DPON=ON

Acquisition of parameters which can be set

> RANGE DPON
< r:DPON=I,ON,OFF

"ON" or "OFF" can be set for direct power-on.

*Commands are indicated by ">", and responses are indicated by "<".

When a command is not supported, "e:0002 INVALID_COMMAND" is returned.

Supported Command States

OFF

ON

PM

Ч

Ч

*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.

Commands

supported

Meaning
This sets direct power-on to ON.
This sets direct power-on to OFF.

The parameters which can be set at any given point in time can be obtained using the
RANGE command.

Parameter

The current direct power-on setting can be obtained using the GET command.

ON

Description

Example

Response

It can be executed when the projector is in both the remote mode and power-on status at the same
time.

Direct power-on cannot be set to ON when "OFF" has been selected as the power management
setting.

Commands

Function

Parameter

Format

Control

This command functions in the same way as when "System settings" - "Direct power-on" are
selected on the menu.

Setting

Reference

Direct power-on setting

Mode

ID

OFF

"i:OK" is returned if the parameter was set properly.

01.00**

01.01**

01.01**

01.01**

SX50

SX6

SX60

X600

Model Power supply

Input

Mode

Remote

Local

×

Remarks

D-RGB A-RGB1 A-RGB2

Comp

Video

S-Video D-Video SCART

None

SX50

SX6

×

SX60
X600

PAGE 63

This manual is related to the following products: