Canon REALiS X600 - Manual (Page 133)

User Command Specifications 9．Details of command GET COMVER
1 GET COMVER
GET COMVER
GET□COMVER
?△COMVER
g:COMVER="：Character string>"
:= 99.9999
For all other responses, refer to "Error List."
-1 This inquiry can be executed in any status provided that AC power is supplied to the projector.
-2
> GET COMVER or ? COMVER
< g:COMVER="01.0000"
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
○ ○ ○
○ ○ ○
* If a command cannot be supported, 'INVALID_MODE' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
○ ○ ○ ○ ○
The user command version consists of a 2-digit number followed by a 4-digit number. Question
marks may appear in place of the numerals if the firmware has not been upgraded correctly.
(Example "??:????")
○ ○ ○
X600
SX60
SX6 ○ ○ ○
○ × ○ ○ ○ – ○ – SX50 ○ ○ ○
S-Video D-Video SCART None
Mode
Remote Local
Remarks
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video
○
Control Setting
Description
Response
This inquires about the user command version of the projector.
Character
string
Reference
For the "SX50," the remote mode must be established.
Commands
Function
Format
User command version inquiry
Mode
X600
01.01**
Commands
supported
Example
○
SX50 SX6
○
SX60
01.00** 01.01** 01.01**
○
PAGE 125