Canon REALiS X600 - Manual (Page 121)

User Command Specifications 9．Details of command GET KEYLOCK
1 GET KEYLOCK
GET KEYLOCK
GET□KEYLOCK
?△KEYLOCK
g:KEYLOCK=：ＩＤ>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 Key lock can be set by the KEYLOCK command.
> GET KEYLOCK or ? KEYLOCK
< g:KEYLOCK=OFF
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Mode Control Setting Reference
Description
Response
This inquires about the current key lock setting.
ID
Setting
MAIN Main key lock
RC Remote control key lock
Commands
Meaning
OFF No locking (OFF)
Function
Format
Key lock setting inquiry
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
SX50 SX6 SX60 X600
01.00** 01.01** 01.01** 01.01**
○ ○ ○ ○
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video
Mode
Remote Local
Remarks
S-Video D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
X600
Commands
supported
Example
SX60
PAGE 113