Canon REALiS X600 - Manual (Page 117)

User Command Specifications 9．Details of command GET NOSHOW
1 GET NOSHOW
GET NOSHOW
GET□NOSHOW
?△NOSHOW
g:NOSHOW=：ＩＤ>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The current display screen when nothing is shown can be set by the NOSHOW command.
> GET NOSHOW or ? NOSHOW
< g:NOSHOW=LOGO
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
User screen
Reference Mode Control Setting
Blue screen
LOGO
Commands
Setting Meaning
BLACK Black screen
01.01** 01.01**
Description
Function
Format
Display screen when nothing is shown setting inquiry
Response
This inquires about the current setting for the screen to be displayed when nothing is shown.
ID
BLUE
SX50 SX6 SX60 X600
01.01**
○ ○ ○ ○
01.00**
Model Power Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
Example
X600
Commands
supported
PAGE 109