Canon REALiS X600 - Manual (Page 178)

User Command Specifications ９．Details of command RANGE GUID
1 RANGE GUIDE
RANGE GUIDE
RANGE□GUIDE
r:GUIDE=I, , , …,
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2) The guide can be set using the GUIDE command .
> RANGE GUIDE
< r:GUIDE=I, ON, OFF
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
ー ー ー
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Commands
supported
Example
Description
Response
This command is used to inquire about the parameter options which enable the guide to be set.
ＩＤ
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
Function
Format
Guide setting enable option request
Reference Setting Control Mode
SX50 SX6 SX60 X600
０１．００** ０１．０１** ０１．０１** ０１．０１**
× ○ ○ ○
Model Power supply Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video
Mode
Remote Local
Remarks
SCART None
SX50 ー ー ー ー ー ー - - ー ー ー
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
X600
PAGE 170