Canon REALiS X600 - Manual (Page 22)

User Command Specifications 9. Details of command REMOTE
1 REMOTE
REMOTE
REMOTE
None
"i:OK" is returned when it was possible to switch the mode properly.
This switches to Remote mode.
-1
-2
However, zoom or focus lens drive stops if the zoom or focus lens is being driven.
-3
-4
-5 When this command is executed, all the statuses and settings listed below are cleared.
・ Digital zoom
・ Presentation timer display
・ Spotlight display
・ Screen temporary off (NoShow)
・ Freeze image (Freeze)
・ Command now being executed (except during "user image registration")
・ Focusing, zooming underway (with the SX6, SX60 and X600)
-6
-7
Mode switching
> REMOTE
< i:OK
Mode viewing
>
< g:MODE=LOCAL
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
○ ○ ○
○ ○ ○
Mode Control Setting Reference
Commands
supported
(Refer to the ZCONTDRV command and FCONTDRV command.)
(Refer to the LOCAL command.)
For all other responses, refer to "Error List."
"Guide display" is not cleared by the transfer of operation to the remote mode. If necessary,
clear the display using the GUIDE command.
The current mode can be referenced using the applicable GET command.
GET MODE or
SX50 SX6 SX60 X600
○
01.00** 01.01** 01.01** 01.01**
○
Model Power
Commands
Function
Parameter
Switch to Remote mode
Format
Example
Response
Description
During Remote mode, all buttons are disabled except for the front panel and remote control
POWER button.
If, in the power management standby status, the "REMOTE" command was received and
operation was switched to the remote mode, the "power-on" (lamp lighted) status is established
unconditionally.
This command can be used in any projector mode.
With the SX50, the setting, control and reference commands except for RC and MAIN can be
used only in the remote mode.
(RC and MAIN can be used only in the "local mode.")
With the SX6, SX60 and X600, there are several setting, control and reference commands
which can be used in the local mode.
Input
○ ○
D-Video SCART None
– ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video
Mode
Remote Local
SX50 ○ ○ ○ ○
○ ○
○ ○ ○ –
○ ○ ○ ○ ○ SX6 ○ ○ ○
SX60
X600
○
○
PAGE 14