Canon REALiS X600 - Manual (Page 8)

User Command Specifications 2. Communication Specifications
Request transmissions sent from PC to the projector
△ △
One of CR (0Dh), LF (0Ah), CR+LF (0Dh+0Ah), Null (00h)
Null
□ BUSY
■ WARN
■ ERR
□ GET
□ RANGE
Control Projector control command. The format is shown below. ■ OK
■ BUSY
■ WARN
■ ERR
□ GET
□ RANGE
Setting Command that sets values for each parameter. The format is shown below. ■ OK
■ BUSY
■ WARN
■ ERR
□ GET
□ RANGE
Reference Requests current value of each parameter. The format is shown below. □ OK
■ BUSY
■ WARN
■ ERR
■ GET
□ RANGE
□ OK
■ BUSY
■ WARN
■ ERR
□ GET
■ RANGE
Requests range which can be set for each parameter. The format is shown
below.
Null Commands
Character string
:= name>△=△
Control command
Character string
Transmission
format
Type Response Description
Commands
Commands with a command character string length of 0. No command
processing is performed.
strings>
■
Type
OK
Setting command
Character string
For the definition of , refer to "Parameter definitions."
:=? △ |
GET□
Reference
command
Character string
Command List Reference
Character strings consisting of 0 or more alphanumeric
characters
:= 0>
:= name>□
:=
RANGE□
PAGE 3