Canon REALiS X600 - Manual (Page 177)

User Command Specifications 9．Details of command RANGE RCCH
1 RANGE RCCH
RANGE RCCH
RANGE□RCCH
r:RCCH=I, , , …,
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE RCCH
< r:RCCH=I, 1, 2
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
(Refer to the ZCONTDRV command and FCONTDRV command.)
Remote control can be set by the RCCH command.
Commands
supported
Example
X600
SX60
○ ○ Ч
Ч
SX6 ○ ○ ○ ○ ○ ○ ○ ○
– – ○ ○
D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○
Mode
Remote Local
Remarks
Model Power Input
D-RGB A-RGB1 A-RGB2 Comp Video S-Video
○ ○ ○ ○
SX50 SX6 SX60 X600
01.00** 01.01** 01.01** 01.01**
Commands
Function
Format
Remote control setting option request
Description
Response
This inquires about the parameter options which enable remote control to be set.
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
ID
Mode Control Setting Reference
PAGE 169