Canon REALiS X600 - Manual (Page 120)

User Command Specifications 9. Details of command GET TERMINAL
1 GET TERMINAL
GET TERMINAL
GET□TERMINAL
?△TERMINAL
g:TERMINAL=：ＩＤ>
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The terminal can be set by the TERMINAL command.
> GET TERMINAL or ? TERMINAL
< g:TERMINAL=OUT
* Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'TERMINAL_OUT' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
SX50
01.01**
×
01.01** 01.01**
Mode Control
Description
Response
Function
Format
Commands
Terminal setting inquiry
ID
Setting Meaning
IN This sets to input
OUT This sets to output
○ ×
This inquires about the current terminal setting.
SX6 SX60 X600
01.00**
None
Model Parameter Input Power
○
Mode
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART
○
Remote Local
SX50
IN ○ ○ ○ ○ ○ ×
OUT ○ ○ Ч Ч ○ ○ – – Ч
SX6
– – – SX60
X600
– – –
○ ○
Example
– – – –
– – ○
– – – – –
Setting Reference
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
×
PAGE 112