Canon REALiS X600 - Manual (Page 184)

User Command Specifications ９．Details of command RANGE FCONTDRV
1 RANGE FCONTDRV
RANGE FCONTDRV
RANGE□FCONTDRV
r:FCONTDRV=I, , , …,
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given if the zoom or focus lens is being driven .
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2) Continuous control of the focus lens can be exercised using the FCONTDRV command .
> RANGE FCONTDRV
< r:FCONTDRV=I, STOP, FAR, NEAR
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
Commands
supported
Example
Focus lens continuous drive control option request
ＩＤ
This command is used to inquire about the parameter options which enable the focus lens to be driven
continuously.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
０１．００** ０１．０１**
Control Setting Reference Mode Commands
Function
Response
Description
Format
０１．０１** ０１．０１**
SX50
○ ○
SX6 SX60 X600
Model Power supply Input Mode
Remote Local
× ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 － － － － － － － － － － －
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
X600
PAGE 176