Canon REALiS X600 - Manual (Page 162)

User Command Specifications 9．Details of command RANGE 6AXR-6AXY
1 RANGE 6AXR-6AXY
RANGE 6AXR-6AXY
R range inquiry G range inquiry B range inquiry C range inquiry M range inquiry Y range inquiry
RANGE□6AXR RANGE□6AXG RANGE□6AXB RANGE□6AXC RANGE□6AXM RANGE□6AXY
-1
A "busy" response is given while the zoom or focus lens is being driven.
-2
> RANGE 6AXC
< r:6AXC=N, -20, 20, -20, 20
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
Commands
Function
Format
Example
Description
Response
6-axis correction R to Y hue/color saturation setting range request
Number
Commands
supported
r:6AXR(G,B,C,M,Y)=N, , ,
,
For all other responses, refer to "Error List."
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The 6-axis correction R to Y can be set by the 6AXR to Y command.
SX50 SX6
Control Setting
This inquires about the range within which the 6-axis correction R to Y hue and color saturation can be
set.
Reference Mode
01.00** 01.01** 01.01** 01.01**
SX60 X600
○ ○ ○ ○
Model Power Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 ○ ○ ○ ○ ○ ○ – – ○ ○ ×
SX6 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ×
SX60
X600
PAGE 154