Canon REALiS X600 - Manual (Page 109)

User Command Specifications 9．Details of command GET VKS/HKS
1 GET VKS/HKS
GET VKS/HKS
Vertical keystone setting inquiry Horizontal keystone setting inquiry
GET□VKS GET□HKS
?△VKS ?△HKS
g:VKS=
g:HKS=
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2
> GET VKS or ? VKS
< g:VKS=-23
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* If the necessary signals are not input, 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
X600
SX60
○ ○ ○ × ○ ○ ○ ○ SX6 ○ ○ ○
– Ч ○ Ч ○ ○ ○ – SX50 ○ ○ ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power Input Mode
Remote Local
○ ○ ○ ○
01.00** 01.01** 01.01** 01.01**
Vertical/horizontal keystone setting inquiry
These inquire about the current vertical and horizontal keystone settings.
Number
Mode Control Setting Reference Commands
Function
Format
Description
Response
The vertical and horizontal keystone settings can be selected by the VKS and HKS commands,
respectively.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
Example
SX50 SX6 SX60 X600
PAGE 101