Canon REALiS X600 - Manual (Page 86)

User Command Specifications 9．Details of command GET TRACK
1 GET TRACK
GET TRACK
GET□TRACK
?△TRACK
g:TRACK=
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
With some input signals, it may not be possible to make this inquiry.
-2 The tracking adjustment can be set by the TRACK command.
> GET TRACK or ? TRACK
< g:TRACK=21
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
SX50 SX6
01.01**
This inquires about the current tracking adjustment value.
01.00** 01.01**
SX60 X600
01.01**
Ч Ч Ч –
Commands
Function
Format
Description
Response
Number
Mode Control Setting Reference
Tracking adjustment value inquiry
For all other responses, refer to "Error List."
○ ○ ○ ○
Model Power Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 Ч ○ ○ – Ч ○ Ч
SX6 Ч ○ ○ Ч Ч Ч Ч Ч Ч ○ Ч
X600
Commands
supported
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Example
SX60
PAGE 78