Canon REALiS X600 - Manual (Page 161)

User Command Specifications ９．Details of command RANGE 6AXADJ
1 RANGE 6AXADJ
RANGE 6AXADJ
RANGE□6AXADJ
r:6AXADJ=I, , , …,
For all other responses, refer to "Error List."
(1)
However, a "busy" response is given while the zoom or focus lens is being driven.
（ Refer to the ZCONTDRV command and FCONTDRV command. ）
(2) ON or OFF for the 6-axis adjustment can be set using the 6AXADJ command .
> RANGE 6AXADJ
< r:6AXADJ=I, ON, OFF
*Commands are indicated by ">", and responses are indicated by "<".
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
OFF ON PM
－ － －
Ч ○ Ч
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
X600
SX60
○ ○ ○ × ○ ○ ○ ○ SX6 ○ ○ ○
－ － － － － － － － SX50 － － －
ＩＤ
Mode
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video Remote Local
Setting
Model Power supply Input
None S-Video D-Video SCART
SX6
This command is used to inquire about the parameter options which enable the 6-axis adjustment to be set.
SX60 X600
Control Mode
6-axis adjustment option inquiry
SX50
Reference Commands
Function
Format
Example
Description
Response
０１．００** ０１．０１** ０１．０１** ０１．０１**
× ○ ○ ○
PAGE 153