Canon REALiS X600 - Manual (Page 156)

User Command Specifications 9．Details of command RANGE HUE
1 RANGE HUE
RANGE HUE
RANGE□HUE
r:HUE=N, ,
-1
A "busy" response is given while the zoom or focus lens is being driven.
With some input signals, it may not be possible to make this inquiry.
-2
> RANGE HUE
< r:HUE=N, -20, 20
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
* If the command cannot be supported, 'INVALID_MODE,' 'NOT_POWER_SUPPLIED' or 'INVALID_SOURCE' is returned as an error response.
* If the necessary signals are not input, 'INVALID_SIGNAL (*****)' or 'NO_SIGNAL' is returned.
* "i:BUSY" may be returned if the power status is being switched.
01.01** 01.01**
Commands
supported
SX50 SX6
01.00** 01.01**
○ ○ ○
Control Setting Reference
For all other responses, refer to "Error List."
Hue setting range request
Mode
This inquires about the range within which the hue can be set.
Number
SX60 X600
This inquiry can be made when the projector is in both the remote mode and power-on status
at the same time.
(Refer to the ZCONTDRV command and FCONTDRV command.)
The hue can be set by the HUE command.
Commands
Function
Format
Example
Description
Response
○
Model Power Input Mode
Remote Local
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
SX50 Ч ○ Ч – Ч Ч Ч
○ ○
○ Ч
– ○ ○ Ч
– –
–
SX6
Ч Ч Ч
○ ○
Ч Ч Ч
○
SX60 ○ ×
X600 –
– –
Ч
○
○ Ч
PAGE 148