Canon REALiS X600 - Manual (Page 107)

User Command Specifications 9. Details of command GET 6AXR-6AXY
1 GET 6AXR-6AXY
GET 6AXR-6AXY
R setting inquiry G setting inquiry B setting inquiry C setting inquiry M setting inquiry Y setting inquiry
GET□6AXR GET□6AXG GET□6AXB GET□6AXC GET□6AXM GET□6AXY
?△6AXR ?△6AXG ?△6AXB ?△6AXC ?△6AXM ?△6AXY
g:6AXR(G,B,C,M,Y)=▽
For all other responses, refer to "Error List."
-1
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The 6-axis correction R to Y can be set by the 6AXR to Y command.
> GET 6AXR or ? 6AXR
< g:6AXR=12, -8
* Commands are indicated by ">", and responses are indicated by "<".
Supported Command States
OFF ON PM
Ч ○ Ч
Ч ○ Ч
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
X600
SX60
○ ○ ○ × ○ ○ ○ ○ SX6 ○ ○ ○
– ○ ○ × ○ ○ ○ – SX50 ○ ○ ○
Remarks
D-RGB A-RGB1 A-RGB2 Comp Video S-Video D-Video SCART None
Model Power Input Mode
Remote Local
○ ○ ○ ○
01.00** 01.01** 01.01** 01.01**
SX50 SX6 SX60 X600
Number
Mode Control Setting Reference
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
Commands
supported
Example
Commands
Function
Format
Description
Response
6-axis correction R to Y hue/color saturation setting inquiry
This inquires about the current 6-axis correction R to Y hue and color saturation settings.
PAGE 99