Canon PIXMA MX870 - Manual (Page 918)

WSD setting
Activates/deactivates the WSD (one of the network protocols supported in Windows 7 and
Windows Vista) setting.
Note
When this setting is activated, the printer icon is displayed on the Network Explorer in
Windows 7 and Windows Vista.
LLTD setting
Activates/deactivates the Link Layer Topology Discovery (LLTD) setting. When this setting is
activated, Network Map for Windows 7 or Windows Vista is available.
Bonjour settings
Setting items for LAN using Bonjour for Macintosh.
Enable/disable Bonjour
Selecting Enable allows you to use Bonjour to perform the network settings.
Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
You cannot use the same service name as that already used for other LAN connected
devices.
LPR service advertising
Selects whether to advertise the Line PRinter daemon protocol (LPR) service using Bonjour.
Note
Select ON for this setting and Enable for LPR protocol setting to advertise the Line PRinter
daemon protocol (LPR) service.
LPR protocol setting
Activates/deactivates the LPR setting.
Reset LAN settings
Initializes the network settings on the machine.
Important
Note that initialization erases all connection settings with computers, and printing or scanning
operation may become impossible. To use the machine over network, refer to your setup
manual. Be careful when you initialize the network settings on the machine.
Note
When you initialize the network settings using the Canon IJ Network Tool, refer to Initializing the
Network Settings of the Machine .
Page top
Page 918 of 1127 pages LAN settings