Other settings – Canon PIXMA MX870 User Manual

Page 917

XXXX: XXXX

MAC address

XX:XX:XX:XX:XX:XX

IPsec settings

Enable (ESP)/Enable (ESP & AH)/
Enable (AH)/Disable

Pre-shared key

XXXXXXXXXXX

Printer name

XXXXXXXXXXXXXXX

Bonjour service
name

Canon MX870 series

_XXXXXXXXXXXX

Canon MX870 series

_XXXXXXXXXXXX

("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
LAN setting list
The list of wired LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.

Items

Setting (IPv4)

Setting (IPv6)

Connection

Active/Inactive

IP address

XXX. XXX. XXX. XXX

XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX

Subnet mask

XXX. XXX. XXX. XXX

Subnet prefix

length

XXX

Default gateway

XXX. XXX. XXX. XXX

XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX

MAC address

XX:XX:XX:XX:XX:XX

IPsec settings

Enable (ESP)/Enable (ESP & AH)/Enable

(AH)/Disable

Pre-shared key

XXXXXXXXXXX

Printer name

XXXXXXXXXXXXXXX

Bonjour service
name

Canon MX870 series

_XXXXXXXXXXXX

Canon MX870 series _XXXXXXXXXXXX

("X" represents an alphanumeric character ranging from 0 to 9 and A to F.)
Print LAN details
You can print out the network settings of the machine such as its IP address and SSID.
For more information on the machine's network setting is printed out, refer to

Printing Out

Network Setting Information

Important

This print out contains valuable information about your computer. Handle it with care.

Other settings

Set printer name
Specifies the printer name. You can use up to 15 characters for the name.

Note

You cannot change this setting with the memory card inserted in the Card Slot.
You cannot use the same printer name as that already used for other LAN connected
devices.
You cannot use a hyphen for the initial or last character of the printer name.

IPv4/IPv6 setting

Selects the IP version (IPv4 or IPv6). It is recommended to use the machine with IPv4.
Set memory card sharing
Selects whether to share the Card Slot with a LAN connected computer.

Note

You cannot change this setting with the memory card inserted in the Card Slot.

Page 917 of 1127 pages

LAN settings