Canon PIXMA MX870 - Manual (Page 894)

Advanced Guide > About Bluetooth Communication > Bluetooth Settings > Bluetooth Settings Screen
Bluetooth Settings Screen
Canon IJ printers with the Bluetooth interface are divided into two types. One is equipped with a graphic
LCD, and the other with a text LCD.
Graphic LCD
Text LCD
1. Select device name/Device name
Displays the device name of the printer to which the Bluetooth unit is attached.
Select device name/Device name Screen
2. Access refusal setting/Access refusal
Selecting ON will disable searching of this printer by a Bluetooth-compatible device.
Access refusal setting/Access refusal Screen
3. Security settings
Select Enable and then specify the security mode to activate the passkey set on the Change
passkey/Passkey screen.
Security settings Screen
4. Change passkey/Passkey
You can change the passkey. The passkey refers to an identification number to be determined. It is
used to prevent unwanted access from other Bluetooth devices. The initial value is set to 0000.
Change passkey/Passkey Screen
Page 894 of 1127 pages Bluetooth Settings Screen