Canon PIXMA MX870 - Manual (Page 805)

Checking Information (Checking the
Recipient's Information)
.
#085 Try again in black & white
transmission. The recipient's fax machine is not color-
compatible.
Resend the document in black & white.
STOP The Stop button was
pressed during
transmission.
The Stop button was pressed to cancel
transmission of the document. Resend it if
necessary.
RX Report
This machine can print a RX (reception) report after receiving a document, confirming whether the
reception has been completed successfully. At the time of purchase, the machine is set so that RX
reports are not printed at all. You can set the machine to print a report each time it receives a
document, or only when an error occurs.
Note
For details on the RX report settings, see RX Report .
For the errors when you receive a fax, see Errors when you receive a fax .
Errors when you receive a fax
If an error occurs when you receive a fax, the error number is printed in the RX report (there are
some errors for which the cause is also printed).
The causes corresponding to the error numbers are as follows.
No. Cause Action
#003 It takes too long to receive a
page.
Contact the sender and have the sender divide
the fax or set the image quality (Fax resolution)
to a lower setting and resend it.
#005 No answer. When receiving a fax manually, the machine
could not detect the signals from the sender's
fax machine.
Contact the sender and have the sender
resend it, or set the machine to receive the fax
automatically.
#037 Memory is full. The machine could not receive a fax because
its memory is full.
Delete contents in memory, then ask the
sender to resend the fax. See
Deleting a
Document in Memory .
#046 Reception has been
rejected due to the
specified fax rejection
condition. Reception has been rejected because the fax
matches the fax rejection condition specified by
Fax reception reject. For details, see
Rejecting
Fax Reception .
STOP The Stop button was
pressed during reception.
The Stop button was pressed to cancel
reception of the fax. Contact the sender and
have the sender resend it if necessary.
MULTI TX Report
This machine prints out a MULTI TX (transmission) report after sending the same document to
several destinations, confirming whether the transmission to all the recipients has been
completed successfully.
Page top
Page 805 of 1127 pages Summary of Reports and Lists