Canon PIXMA MX870 - Manual (Page 907)

Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > Changing the Machine
Settings on the LCD
Changing the Machine Settings on the LCD
This section describes the procedure to change the settings in the Device settings screen, taking the
steps to specify Extended copy amount as an example.
1. Make sure that the machine is turned on.
2. Press the Setup button.
3. Select Device settings, then press the OK button.
The Device settings screen is displayed.
4. Use the button to select a setting item, then press the OK button.
5. Use the button to select a menu, then press the OK button.
The setting screen for the selected item is displayed.
6. Use the button to select a setting item, then press the OK button.
Page 907 of 1127 pages Changing the Machine Settings on the LCD