Using the caller id service to reject calls – Canon PIXMA MX870 User Manual
Page 791
Advanced Guide
>
Faxing
>
Sending/Receiving Faxes Using the Operation Panel of the Machine
> Using the Caller ID
Service to Reject Calls
Using the Caller ID Service to Reject Calls
If you subscribe to the Caller ID service, the machine detects the sender's Caller ID. If the sender's ID
does not match the conditions specified in this setting, the machine rejects the phone call or fax
reception from the sender.
1.
Press the Setup
button.
2.
Select
Device settings, then press the OK
button.
3.
Use the
button to select FAX settings, then press the
OK
button.
4.
Use the
button to select Reception settings, then press the OK
button.
5.
Use the
button to select Caller rejection, then press the OK
button.
6.
Use the
button to select Yes, then press the OK
button.
You can now perform settings for Caller rejection.
7.
Use the
button to select the phone call or fax rejection condition, use the
button to select the setting, then press the
OK
button.
Anonymous no.
Selects whether to reject a phone call or fax reception from an anonymous number.
Out of area no.
Selects whether to reject a phone call or fax reception out of the subscribed service area.
Rejected no.
Selects whether to reject a phone call or fax reception from the numbers registered to Rejected
Page 791 of 1127 pages
Using the Caller ID Service to Reject Calls