Canon PIXMA MX870 - Manual (Page 447)

not scan the Photo Index Sheet properly.
12. Load paper to print photos.
Make sure that the page size and media type of the loaded paper match those specified on the
Photo Index Sheet.
Note
When printing images using the Photo Index Sheet, you can select 4" x 6" (101.6 x 152.4 mm),
5" x 7" (127 x 177.8 mm), 8.5" x 11" (Letter), or A4 for the page size.
13. Make sure that Scan sheet and print is selected, then press the OK button.
14. Place the Photo Index Sheet face-down on the Platen Glass, then press the
Color
button.
When placing the Photo Index Sheet, place the front side down, align the upper left corner of it with
the alignment mark as shown in the figure below, then close the Document Cover.
The Photo Index Sheet is scanned and the specified photos will be printed.
Remove the Photo Index Sheet on the Platen Glass after printing is complete.
Important
You cannot use the ADF to scan the Photo Index Sheet.
If Failed to scan Photo Index Sheet. is displayed on the LCD, press the OK button and confirm
the following:
The Platen Glass and the Photo Index Sheet are not dirty
The Photo Index Sheet is placed in the correct position with its front side facing down
You have filled in all the necessary circles on the sheet
Only one option is selected for items that do not accept two or more selections
Do not remove the USB flash drive while printing is in progress.
Note
To cancel printing, press the Stop button.
To continue to print photographs using subsequent Photo Index Sheets, repeat the procedure
from step 13.
If the USB flash drive has been removed and then reinserted before printing with the Photo
Index Sheet, it may take some time before printing starts.
Page top
Page 447 of 1127 pages Printing by Using the Photo Index Sheet