Lan settings, Change wireless/wired, Wireless lan setup – Canon PIXMA MX870 User Manual
Page 916: Confirm lan settings
Advanced Guide
>
Changing the Machine Settings
>
Changing the Machine Settings on the LCD
> LAN settings
LAN settings
Change wireless/wired
Activates either wireless LAN or wired LAN. You can also deactivate wireless/wired LAN.
Note
When you change the connection method (wired or wireless), set up the machine according to
the method you will use. For details, refer to your setup manual.
Wireless LAN setup
Selects the setting method for wireless LAN connection.
Note
You can also enter this setting menu by selecting Wireless LAN setup from the Setup menu. In
this case, activate wireless LAN.
Easy setup
Select when you perform settings for wireless LAN manually using the Operation Panel of the
machine.
Note
If you perform settings for wireless LAN from the computer, refer to your setup manual.
Other setup
Select WPS, WCN, or Advanced setup. If you select WPS, select Push button method or PIN
code method according to the method your access point supports, then follow the on-screen
instructions. If you select WCN, you need a USB flash drive on which settings for wireless LAN
are saved. If you select Advanced setup, follow the on-screen instructions.
Confirm LAN settings
The list of wireless/wired LAN settings of this machine is displayed on the LCD.
You can print the list from this setting menu.
WLAN setting list
The list of wireless LAN settings of this machine is displayed on the LCD.
The following setting items are displayed.
Items
Setting (IPv4)
Setting (IPv6)
Connection
Active/Inactive
Active/Inactive
SSID
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
Communication
mode
Infrastructure
Infrastructure
Channel
XX
XX
Wireless LAN
security
Disable/WEP(64bit)/WEP(128bit)/
WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
Disable/WEP(64bit)/WEP(128bit)/
WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
IP address
XXX. XXX. XXX. XXX
XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX
Subnet mask
XXX. XXX. XXX. XXX
-
Subnet prefix
length
-
XXX
Default gateway
XXX. XXX. XXX. XXX
XXXX: XXXX: XXXX: XXXX: XXXX: XXXX:
Page 916 of 1127 pages
LAN settings