Canon PIXMA MX870 - Manual (Page 473)

Advanced Guide > Scanning > Scanning with Using the Operation Panel of the Machine > Forwarding Scanned Data to
PC Using the Operation Panel of the Machine
Forwarding Scanned Data to PC Using the Operation Panel of
the Machine
You can forward scanned data to the PC using the Operation Panel of the machine.
Before forwarding scanned data to the PC, confirm the following:
The necessary application software (MP Drivers and MP Navigator EX)
is installed.
If the application software (MP Drivers and MP Navigator EX) is not yet installed, insert the Setup CD-
ROM
into the computer's disc drive, then perform Custom Install and select MP Drivers and MP
Navigator EX.
The machine is connected to a computer correctly.
Make sure that the machine is connected to the computer correctly.
Do not plug in or unplug the USB or LAN cable when scanning images with the machine, or when
the computer is in sleep or standby mode.
If you perform scanning via a network connection, make sure that all the required settings have been
specified. For details, refer to
Network Scan Settings .
The destination and the file name are specified in MP Navigator EX.
You can specify the destination and the file name in MP Navigator EX. For details on how to perform
settings or the initial settings, refer to
Scanner Button Settings Tab (Save to PC) .
1. Make sure that the machine is turned on.
2. Press the SCAN button.
If you forward the data to the USB-connected computer:
Go to step 3.
If you forward the data to the network-connected computer:
The screen for selecting to which you save the data is displayed.
Note
If the setting screen for forwarding the data to the USB-connected computer is displayed on the
LCD after you press the
SCAN button, press the left Function button to display the screen for
selecting to which you save the data.
1. Select PC, then press the OK button.
2. Use the button to select the PC to forward the scanned data, then press the OK button.
Page 473 of 1127 pages Forwarding Scanned Data to PC Using the Operation Panel of the Machine