Canon PIXMA MX870 - Manual (Page 841)

Note
You can set the page size, media type, and layout before printing.
Setting the Page Size, Media Type, and Layout When Printing from a Mobile Phone
7.
Start printing from a mobile phone.
For the device name, select the default value Canon XXX-1 (where "XXX"
is your machine's name).
If you are required to input a passkey, input the default value "0000".
You can change the device name of the machine, passkey, and so on from the
Bluetooth settings screen.
Changing the Bluetooth Settings
Note
Communication is possible in a range of up to about 33 ft. / 10 m depending on
the conditions below. Printing speed may vary depending on the following
conditions:
Presence of obstacles between the communication equipment, and radio
conditions.
Presence of magnetic fields, static electricity, or electromagnetic interference.
Receiver sensitivity and antenna performance of the communication equipment.
Video files cannot be printed.
Depending on your device, data saved on a memory card may not be printed.
About transmittable data
Due to security settings on the mobile phone, downloaded content or
photos downloaded from a URL attached to an E-mail cannot be printed.
Depending on the size of a photo, it may take a while for this machine to
start printing after starting wireless communication.
Printed quality and orientation (portrait or landscape) is determined
automatically according to the shot photo size.
Depending on the photo size shot on the mobile phone, the edges of the
image may be cut off when performing borderless printing; the margin size
may change when printing with borders.
If the photo file is over 1.8 MB in size, it may not be possible to send the
file.
Page top
Page 841 of 1127 pages Printing via Bluetooth Communication