Canon PIXMA MX870 - Manual (Page 729)

Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens > Scan
Tab
Scan Tab
On the Scan tab, you can specify the following settings.
Status of ScanGear dialog after scanning
Select what to do with ScanGear (scanner driver) after scanning images.
Close ScanGear automatically
Select this to return to the original application when scanning is completed.
Do not close ScanGear automatically
Select this to return to the ScanGear screen for another scan when scanning is completed.
Display the dialog to select next action
Select this to open a screen and select what to do when scanning is completed.
Note
Even if Do not close ScanGear automatically or Display the dialog to select next action is set,
some applications may not support it.
ADF Duplex Paper Output Settings
Specify how to output the paper when scanning both sides of multiple documents at one time from the
ADF (Auto Document Feeder).
Output by back/front(Fast) is set when scanning into applications such as OCR software that do not
Page 729 of 1127 pages Scan Tab