Lenze 8200 Frequency inverters - Manual (Page 26)

Preface and general information
8200SHB0199 1-10
Considered basic standards for the test of noise emission:
Basic standard Test Limit value
EN 55022 7/92 Radio interference housing and mains
Frequency range 0.15 - 1000 MHz Class B
for use in residential areas
and commercial premises
EN 55011 7/92
(used in addition to the
requirements of IEC 22G) Radio interference housing and mains
Frequency range 0.15 - 1000 MHz
The emission of noise in industrial premises is not
limited in IEC 22G. Class A
for use in
industrial premesis
IEC 801-2 /91 Electrostatic discharge
on housing and heat sink Severity 3
6 kV with contact discharge
8 kV air discharge
IEC 1000-4-3 Electromagnetic fields
Frequency range 26 - 1000 MHz Severity 3
10 V/m
ENV 50140 /93 High-frequency field
Frequency range 80 - 1000 MHz,
80 % amplitude modulated Severity 3
10 V/m
Fixed frequency
900 MHz with 200 Hz, 100 % modulated 10 V/m
IEC 801-4 /88 Fast transients
burst on power terminals Severity 3
2 kV / 5 kHz
Burst on bus and control cables Severity 4
2 kV / 5 kHz
IEC 801-5 Surge test
Mains cables Installation class 3
Hameln, 01 October, 1995
________________
(i. V. Loy)
Product Manager
Show/Hide Bookmarks