Apple Color 1.5 - Manual (Page 427)

To set up and use the CP100 for use with Color
1 Connect the TDLan port of the CP100 to the primary Ethernet port of your computer
using an Ethernet cable.
Important: The CP100 cannot be connected to the second Ethernet port of your Mac Pro;
it must be connected to your computer’s primary Ethernet port, if necessary through a
router or switch if you need to share the port with an Internet connection.
2 Turn on the CP100 and wait for the unit to power up.
3 Open Color.
If you’re opening Color for the first time, you see the Control Surface Startup dialog. If
you’ve already opened Color and have turned off the option for making this dialog appear,
you need to click the Show Control Surface Dialog button in the User Prefs tab of the
Setup room.
4 When the Control Surface Startup dialog appears:
a Choose “Tangent Devices - CP100” from the Control Surface pop-up menu.
b When you’re prompted for your Administrator password, enter it into the field and click
OK.
The CP100 should now be ready for use with Color.
Controls in the CP100
The CP100 features the following controls:
• Do: Copy grade (Mem-Bank 1)
• Undo: Paste grade (Mem-Bank 1)
• Redo: Copy grade from previous edit on Timeline
• Cue: Cue up the navigation (modes are Timecode or Shot ID)
• Mark: Create still
• In: Set play marker In
• Out: Set play marker out
427 Appendix D Setting Up a Control Surface