Apple Color 1.5 - Manual (Page 137)

Control Surface Settings
If you're using a control surface with Color, the following parameters let you adjust how
motion applied to a particular control corresponds to the resulting adjustment that's
made.
• Hue Wheel Angle: This parameter specifies the angle at which colors appear on the
color wheel of color controls in the Color interface and the corresponding angle at
which these colors are adjusted when using the joyballs of a control surface. This is
customizable in order to accommodate colorists who are used to working with different
systems:
• 122 is the default angle of red for DaVinci color correction systems, which corresponds
to the angle at which red appears on a Vectorscope. This is the default Color setting.
• 0 is the default angle of red for Pogle color correction systems, which corresponds
to the orientation of the controls of the older Mk III telecine.
Hue wheel angle at 122 Hue wheel angle at 0
• Encoder Sensitivity: This parameter controls the speed with which the rotation of knobs
on a control surface changes the value of their associated Color controls.
• Jog/Shuttle Sensitivity: This parameter controls the speed at which the playhead moves
relative to the amount of rotation that's applied to a control surface's Jog/Shuttle wheel.
137 Chapter 5 Configuring the Setup Room