Apple Color 1.5 - Manual (Page 385)

Still Store View Settings
Each still image has its own settings for how that image will appear when it’s recalled.
These settings can be found on the right side of the Still Store room.
• Enable: Makes the currently loaded Still Store image visible in the preview and video
output monitors. Identical to the Still Store > Enable (Control-U) command.
• Transition: This parameter determines how much of the loaded still is visible onscreen.
When set to 0, the loaded still is not visible at all. When set to 1, the loaded still fills the
entire screen. Any value in between creates a split-screen view.
• Angle: Changes the angle along which the border of a split screen is oriented. The
orientation buttons below automatically change the Angle parameter, but the only
way to create a diagonal split screen is to customize this control yourself.
• Left to Right: Changes the Angle parameter to 180 degrees, to create a vertical split
screen with the still to the left.
• Right to Left: Changes the Angle parameter to 0 degrees, to create a vertical split screen
with the still to the right.
• Top to Bottom: Changes the Angle parameter to –90 degrees, to create a horizontal
split screen with the still at the top.
• Bottom to Top: Changes the Angle parameter to 90 degrees, to create a horizontal split
screen with the still at the bottom.
385 Chapter 16 The Still Store