Apple Color 1.5 - Manual (Page 424)

Controls for the MCS-3000
Many of the controls in the MCS-3000 are identified by the text displays running along
the top of each panel.
F1
M1
W1
W2
W3
W4
W5
W6
W7
JOG SHUTTLE
M2 M3
1 2 3 4 5 6 7 8 BANK 1
BANK 2
HOURS MINUTES SECONDS FRAMES
BANK 4
BANK 4
PAGE
ASSIGN
UTILITY
M4 M5
TIME CODE DISPLAY F2
F3
F4
F5
F6
F7
F8
The less obvious controls and functions are as follows:
• Page 1-8: Selects one of the eight main rooms in Color
• F1: Change keyframe interpolation
• F2: Add keyframe
• F3: Remove keyframe
• F4 (Secondaries room): Toggle secondary between inside and outside
• F5 (Secondaries room): Toggle vignette off and on
• F6 (Secondaries room): Open previous secondary tab
• F7 (Secondaries room): Open next secondary tab
• Rewind (<<): Jump to beginning of shot or previous shot
• Forward (>>): Jump to end of shot or next shot
• Stop: Stop playback
• Play: Start playback
• Jog wheel: Playhead control
• Key pad: Used for numerical navigation, by either timecode or shot ID
• Locate: Locate Timecode or Shot ID
• Mode: Toggle Locate between Timecode and Shot ID
• Last: Return to last location
• Enter: Cue navigation
• M1: Speed control
424 Appendix D Setting Up a Control Surface