Apple Color 1.5 - Manual (Page 335)

To mark a grade as the beauty grade
1 Move the playhead to the shot on which you want to set a beauty grade.
2 Select the grade you want to set as the beauty grade.
3 Do one of the following:
• Choose Grade > Set Beauty Grade.
• Press Shift-Control-B.
• Move the pointer into the Timeline area, then press B.
The currently selected grade turns rust red to show that it's the beauty grade.
You can change which grade is set as the beauty grade at any time, or you can clear
beauty grade designations altogether.
To clear the beauty grade designation of one or more shots
1 Select one or more shots in the Timeline.
2 Choose Grade > Clear Selected Beauty Grades.
The beauty grade color is removed from all selected shots.
To clear the beauty grade designation from all shots
µ
Choose Grade > Clear All Beauty Grades.
The beauty grade color is removed from all shots in the Timeline
Disabling All Grades
It's often valuable to disable every single correction you've applied to a shot, in order to
see a before-and-after view of the current state of your grade.
To disable and reenable rendering for all grades
µ
Press Control-G.
335 Chapter 13 Managing Corrections and Grades