Apple Color 1.5 - Manual (Page 173)

If there wasn’t already a grade corresponding to the number of the grade you entered,
one will be created. Whenever a new grade is added, the grades track expands, and the
new grade becomes the selected grade. New grades are clean slates, letting you begin
working from the original state of the uncorrected shot.
To select the current grade
1 Move the playhead to the shot you want to switch the grade of.
2 Do one of the following:
• Click the grade you want to switch to.
• Press Control-1 through Control-4.
• Control-click or right-click the grade you want to switch to, then choose Select Grade
[x] from the shortcut menu, where x is the number of the grade you’re selecting.
That shot in the Timeline is updated with the newly selected grade.
To reset a grade in the Timeline
1 Move the playhead to the shot you want to switch the grade of.
2 Control-click or right-click the grade you want to reset to in the grades track of the
Timeline, then choose Reset Grade [x] from the shortcut menu, where x is the number of
the grade.
When you reset a grade, every room associated with that grade is reset, including the
Primary In, Secondary, Color FX, and Primary Out rooms. The Geometry room is unaffected.
For more information, see Managing Corrections and Grades .
To delete a grade in the Timeline
1 Move the playhead to the shot you want to remove the grade from.
2 Control-click or right-click the grade you want to reset to in the grades track of the
Timeline, then choose Remove Grade [x] from the shortcut menu, where x is the number
of the grade.
Note: If the grades track is locked, you cannot delete grades.
173 Chapter 7 Timeline Playback, Navigation, and Editing