Toshiba Magnia 7010 - Manual (Page 95)

System Configuration Setup
System Setup Utility (SSU)
79
Resource configuration
When you select Resource, the Confirmation dialog boxappears on the screen.
If you have a backup file of system resource, you can restore the system
resources when you click Yes.
Confirmation dialog box
NOTE: If you change the configuration, you must save the configuration
when you exit the SSU program.
Installing a PCI expansion card
1 Switch off the server and remove the top and side panels as shown in
“Removing and replacing the server panels” on page 19.
2 Insert the expansion card in an empty PCI slot.
3 Switch on the server and start the SSU.
4 Select Resources in the Task section.
5 Open the new PCI card.
6 Call Resource Use on the screen and verify the resource. Change the
resource if necessary and select OK.
7 Select Save and save the system configuration.