Starting ssu, Starting ssu from the toshiba server setup tool, Ssu main menu – Toshiba Magnia 7010 User Manual

Page 92

System Configuration Setup
System Setup Utility (SSU)

Starting SSU

The SSU program is included in the three diskettes (1.44 MB). Use copies of
these diskettes to start the SSU and to copy the CFG file.

To start the SSU:

1 Insert the SSU Disk1 into the floppy disk drive and switch on the server.

2 When this message appears on the screen, the SSU disk2, insert it into the

floppy disk drive, and press

Enter

3 When the same message appears on the screen, set write-enable on SSU

disk 3 and insert again into the floppy disk drive, and press

Enter

Starting SSU from the Toshiba Server Setup Tool

When you install an operating system using the Toshiba Server Setup Tool, you
can start the SSU from the Toshiba Server Setup Tool main screen.

SSU Main Menu

SSU Menu

The main menu has four steps. To execute any of these steps, use the mouse and
move the cursor to the desired step with the arrow keys <

↑>, <↓>, <←>, <→>,

and press

Enter

. Execute steps as necessary. The role of each step is:

Please insert “System Setup (SSU)“ disk 2.

Press any key to continue...