Toshiba Magnia 7010 - Manual (Page 123)

System Configuration Setup
Using the Sensor Data and LCD Setup tool
107
Also, as the “Sensor Data & LCD Setup Tool” keyboard format supports the
104-key U.S. style keyboard, entering symbols with the 105-key keyboard
results in symbols different from those shown on the tops of the keys to be
entered.
Follow the procedure below:
LCD display setup
1 Insert the Sensor Data & LCD Setup Tool floppy disk into the floppy disk
drive.
2 Turn on the server.
3 The following menu choices will appear:
Choose option “2. Setup LCD Display Message”
4 The current message that has been set will be displayed.
5 Enter for “Change message?” and type the desired message on the first
line and second line. Type up to 16 characters on each line.
6 When the “HIT ANY KEY” message appears on the screen, remove the
floppy disk from the floppy disk drive.
7 Press any key to restart the server.
1. Setup SMC Board Sensor Data
2. Setup LCD Display Message
3. Setup Expansion HDD Chassis Sensor Data
TOSHIBA LCD Setting Program VerX.XX
*** Current Message ***
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
Line1 M A G N I A 5 1 0 0
Line2
Change message ?
*** Setting Message ***
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
Line1 S e c t i o n n a m e
Line2 S e r v e r n a m e
HIT ANY KEY