Toshiba Magnia 7010 - Manual (Page 127)

System Configuration Setup
Built-in SCSI utility
111
Starting the SCSI utility
When the server is switched on or rebooted, the built-in SCSI BIOS initializa-
tion screen appears.
When the settings are correct, the names and SCSI IDs of the SCSI devices
connected to the built-in SCSI controller are shown.
To start the utility, simultaneously press Ctrl C when prompted during boot.
Menu composition
When you start the Symbios Configuration Utility, the following menu
displays.
Symbios. Inc. SDMS (TW) VX.X PCI SCSI BIOS, PCI Rev. S.S, X.X
Copyright 1995, 1998 Symbios Inc.
PCI-X.X.XX.XX
Press Ctrl-C to start Symbios Configuration Utility
HBA ID LUN VENDOR PRODUCT REV SYNC WIDE SYL/HD/SEC
--- -- --- -------- ----------------- ---- ---- ---- ------------
0 6 0 TOSHIBA CD-ROM XW-6201TA 1030 NO 8
0 7 0 Symbios SYM53C810 0035 10.0 16
1 0 0 FUJITSU MAB3091SC 0106 40.0 16 1024/255/63
1 6 0 TOSHIBA SMC2.0 XXX NO 8
1 7 0 Symbios SYM53C896 0001 80.0 16
2 7 0 Symbios SYM53C896 0001 80.0 16
Symbios, Inc. PCI Boot ROM successfully installed BIOS installed
Successfully!
Symbios Logic SCSI Configuration Utility
Ver. X.XX
MAIN MENU
Port Irq ----------Status---------NvRAM
Num Level Current Next-Boot Found
SYM53C810 2000 11 On On Yes
SYM53C896 3000 11 On On Yes
SYM53C896 3400 11 On On Yes
Change Adapter Status
Adapter Boot Order
Additional Adapter Configuration
Display Mode=Verbose
Mono/Color
Language
Help
Quit
Use arrow keys to select forms menu
Then press ENTER
BIOS Code Segment:C800