Toshiba Magnia 7010 - Manual (Page 62)

Installing Hardware
Adding a CPU 46
.
8 Pull out the latches of the CPU slot and pull out the terminator module.
Removing the terminator module
9 Insert the CPU add-in module into the slot.
10 When the CPU add-in module is securely connected, push the latches
closed to lock the module.
Locking the module
11 Seat the CPU fan unit and secure the thumbscrews.
12 Connect the CPU fan cable.
# of Processors Required Hardware
1 3 Termination Modules
3 VRMs
2 2 Termination Modules
4 VRMs
3 1 Termination Modules
5 VRMs
4 0 Termination Modules
6 VRMs