Toshiba Magnia 7010 - Manual (Page 73)

Installing Hardware
Adding and removing a hard disk drive (HDD)
57
Installing additional hard disk drives
NOTE: Toshiba recommends that you ask your authorized Magnia service
provider to install or replace HDDs.
1 If the server is running, shut it down, set the AC switch on the back of the
server to OFF, and unplug the power cable.
2 Open both doors.
3 Remove the HDD EMI cover.
4 Remove the HDD Slot spacer.
5 Slide the new HDD unit completely into the device bay.