Toshiba Magnia 7010 - Manual (Page 71)

Installing Hardware
Installing the DDS auto-changer
55
Removing the 5.25-inch drive chassis
10 Select the chassis for the DDS auto-changer.
DDS chassis
11 Insert the chassis for the DDS auto-changer and secure it with six screws.
Installing the chassis
12 Secure the mounting rails to the DDS auto-changer. The mounting rails
should be removed from the spacer.
Securing the rails
13 Insert the DDS auto-changer underneath the 5.25-inch drive chassis area,
and connect the power and SCSI signal cable.
DDS chassis Regular chassis