Toshiba Magnia 7010 - Manual (Page 53)

Installing Hardware
Fan module installation/removal
37
™ Do not stand on a rolling chair or other unsecured objects to gain access to a
high location in the rack. You may lose your footing.
™ If there is another system installed in the rack, do not touch its power switch
or power supply units.
Installing the rack server
1 Hold down the front end of the rail lock to free the slide rail.
2 Slide the server fully into the rack.
3 Secure the thumbscrews.
4 Connect the AC cable.
Fan module installation/removal
The server uses several fans to cool the system. Should one of these fans fail,
temperatures inside the server may rise to unacceptable levels and trigger an
alarm.
Removing the fan module
1 If the server is in use, shut it down, set the AC switch on the back of the
server to OFF and unplug the power cable.
CAUTION: Removing a fan module while the power is on could damage
the module and/or the server.
2 Remove the server panels. See “Removing and replacing the server panels”
on page 19.
3 Unplug the fan cables.